|This section is currently under construction, do not edit until this message is gone|
|Doos 03:37, 28 July 2006 (PDT)|
The spectroscope is a tool to examin which parts of white light are absorbed by a gemstone (as well as in other materials).
Materials can absorb parts of the electromagnetic spectrum and when the absorbed parts fall with in the visible range, that absorbed part will influence the color of the material.
When a gemstone is observed with a spectroscope, the absorbed parts show as dark lines and/or bands in the spectroscope image.
There are two types of spectroscopes used in gemology:
- Prism spectroscopes (based on dispersion)
- Diffraction grating spectroscopes (based on diffraction)
Color as perceived by the human eye consists of the 7 colors of the rainbow: Red, Orange, Yellow, Green, Blue, Indigo and Violet. All these colors travel at different speeds and have their own wavelengths. When all the above colors combine, we see it as white light.
When white light reaches a substance, part of the light components may be absorbed by the substance, the other components (residu) form the color of that substance. For instance if a gemstone would absorb all the colors of the rainbow except red, only the red part of the original white light will be visible and the gemstone will therefor be red.
When viewed through a spectroscope, the absorbed parts will disappear from the spectrum image and only red will be visible in the prism of the spectroscope.
Likewise if all colors except red and blue are obsorbed by a gemstone, the residual colors (red and blue) will give rise to a purple gemstone.
The pictures below give a crude example of both above mentiond situations.
Of course in real life the spectrum images are much more sophisticated with small lines and bands indicating specific absorption parts of white light.
The energy from the absorbed colors (or better "wavelengths") is transformed inside the gemstone into other types of energy, mostly heat.
One should consider color as a form of energy traveling at a specific wavelength.
Types of spectroscopes
In gemology we make use of two different types of spectroscopes each with their own characteristics.
Diffraction grating spectroscope
The Diffraction grating specroscope is based on the principle of diffraction. Maybe the best known brand is OPL, which is produced in the UK by Colin Winter.
Light enters through a narrow slit and is then diffracted by a thin film of diffraction grating material. This produces a linear spectrum image with a generally larger view of the red part than a prism spectroscope.
These spectroscopes do not have a built in scale.
The prism spectroscope is based on dispersion. The light enters through a narrow slit (some models allow you to adjust the width of the slit) and is then dispered through a series of prisms. Some models have an attachement with a built in scale and these are generally more expensive than their diffraction type cousins.
As these models are based on dispersion, the blue area of the spectrum is more spread out and the red parts are more condensed than the diffraction grating types.
Use of the spectroscope