Sapphire

From The Gemology Project
Revision as of 13:09, 2 November 2009 by Barbra (talk | contribs) (Flame fusion (Verneuil))
Jump to: navigation, search
Sapphire
Chemical composition Al2O3
Crystal system Trigonal
Habit Prismatic, tabular
Cleavage None, may show parting on twinned stones
Fracture Conchoidal
Hardness 9
Optic nature Uniaxial -
Refractive index 1.762-1.770
(+.009,-.005)
Birefringence 0.008-0.010
Dispersion Low, 0.018
Specific gravity 4
Lustre Vitreous
Pleochroism Moderate to Strong
Cornflower Ceylon sapphire


Sapphire image gallery

Sapphire (a corundum variety) is an aluminum oxide occurring in every color of the rainbow. It is a stone of great hardness and durability. It can also have phenomenal characteristics like asterism (star sapphire) and color changing (like alexandrite). The color changing varieties are mesmerizing, having the ability to change color depending on whether they are viewed in daylight or incandescent light.

The name is derived from the Greek word "sappheiros" meaning "blue". The history of sapphire dates back to at least the 7th century BC, when they were used by the Etruscans. The sapphires used by the Etruscans, Greeks and Romans were imported from India (what is now Sri Lanka). Sapphires were reputed to protect kings from harm and envy. In the 13th century, it was written that sapphires had the power to protect against poverty, to make a stupid man wise and an irritable man good-tempered.

Diagnostics

Color

Sapphire occurs in many colors ranging from colorless to black. When a corundum variety is termed "sapphire" it indicates the blue variety. Any other color (except red, which is named ruby) will have a prefix before "sapphire", such as "yellow sapphire".

Causes of color:

  • sapphire (blue) - charge transfer between Ti and Fe.

Diaphaneity

Translucent to opaque

Refractometer

Sapphire has a refractive index range between nω = 1.767-1.772 and nε = 1.759-1.763, with a maximum birefringence of 0.009.
Optic sign is negative like most, naturally occuring, uniaxial gemstones.

Specific gravity

The specific gravity of sapphire is between 3.98 and 4.02 (mean = 4).
It will sink in all common used heavy liquids.

Spectrum

Spectrum of blue, green and Australian yellow sapphire (high iron content).

Natural blue, green and yellow sapphires with a high iron content may show the typical "450 complex" as seen in this image. The clear lines at 450 and 460nm (less sharp than the 450nm line) will be accompanied with a third (sometimes faint) line at 470nm. Due to partial absorption of wavelengths between these 450 and 460nm lines, this whole section may blend together with "smudges" between the lines.
With lesser iron content only the 450nm line may be observed in natural blue and yellow sapphire. Although this same 450nm line can also be observed in some blue flame fusion (Verneuil) synthetic sapphire, the "450 complex" has not been reported for synthetic sapphire.

Polariscope

Most natural sapphires are cut with the table almost perpendicular to the optic axis and an uniaxial interference figure should be easily found. Some synthetics (Verneuil type) are cut with the table parallel to the optic axis and the interference figure will be hard to find on the girdle.
Finding an interference figure on the table is not diagnostic.

Phenomena

Asterism

12 pointed star sapphire
Photo courtesy of
Wild Fish Gems


Sapphire may show 6 pointed or 12 pointed stars.
The 6 pointed rays are from reflections on rutile needles that form in directions parallel to the 2nd order prism. 12 pointed rays form from reflections on rutile needles (2nd order prism) and from reflections of hematite-ilmenite needles that lie in the planes parallel to the 1st order prism.

Color change

Under daylight
Photo courtesy of The Gem Trader
Under incandescent light
Photo courtesy of The Gem Trader


Cat's-eyes

Trapiche

Trapiche sapphires
Photo courtesy of Chaman Golecha


Synthetics

Flame fusion (Verneuil)

Color change flame fusion sapphire will have a characteristic absorption spectrum with a fuzzy band in the yellow and a diagnostic line at 475nm (in the blue). In some rare cases this 475 line may be seen in natural sapphire.
Curved growth lines are usually seen.

Flame fusion synthetic sapphire (verneuil) displaying curved bands of gas bubbles
Photo courtesy of Alberto Scarani


Other synthesizing methods

  • Flux melt (Chatham, Ramaura)
  • Czochralski pulling process
  • Float zone method

Inclusion Images

Un-heated Sapphires

Distorted guest crystal (possibly calcite) in an un-treated Burmese pink sapphire.
Photo courtesy of Apsara.co.uk
Silk and guest crystals in an un-treated Burmese pink sapphire.
Photo courtesy of Apsara.co.uk
Unusual cluster of rutile silk in an un-treated Madagascan pink sapphire.
Photo courtesy of Apsara.co.uk


Calcite guest crystal in an un-treated Madagascan pink sapphire.
Photo courtesy of Apsara.co.uk
Guest crystals in an un-treated Sri Lankan blue star sapphire. Fine rutile silk can be faintly seen in the background.
Photo courtesy of Apsara.co.uk
A multitude of guest crystals in an un-treated Burmese blue star sapphire.
Photo courtesy of Apsara.co.uk


Calcite guest crystals in an un-treated Burmese blue sapphire.
Photo courtesy of Apsara.co.uk
Liquid fingerprint inclusion in an un-treated Burmese blue sapphire.
Photo courtesy of Apsara.co.uk
Liquid fingerprint inclusion in an un-treated Burmese blue sapphire.
Photo courtesy of Apsara.co.uk


Liquid fingerprints, guest crystals and two phase inclusions in an un-treated Burmese blue sapphire.
Photo courtesy of Apsara.co.uk
Rounded guest crystals, possibly calcite, in an un-treated Burmese blue sapphire.
Photo courtesy of Apsara.co.uk
Un-dissolved rutile silk in an un-treated Sri Lankan blue sapphire. Iridescent colours can be seen when this inclusion is viewed using a fibre optic light.
Photo courtesy of Apsara.co.uk


Heated Sapphires

Microscopic particle inclusions with straight colour banding in a heat treated Thai blue sapphire. The particles give the stone a sleepy or hazy appearance which is common to sapphires from Kanchanaburi, Thailand.
Photo courtesy of Apsara.co.uk
Many included crystal surrounded by tension halos due to heating. 20 cts Sri-lanka sapphire.
Photo courtesy of Alberto Scarani


Beryllium-Treated Sapphires

Dendritic inclusion with 'cotton wool' type inclusions in beryllium-treated sapphire.
Photo courtesy of Apsara.co.uk
Liquid tubular channel inclusions in beryllium-treated sapphire.
Photo courtesy of Apsara.co.uk
Wheat-like feather inclusion in beryllium-treated sapphire.
Photo courtesy of Apsara.co.uk


A cross-sectioned slice through a beryllium-treated sapphire. The orange colour rim is clearly visible around the pink core.
Photo courtesy of Apsara.co.uk
Beryllium treated orange sapphire, partially re-crystallized melted inclusion.
Photo courtesy of Alberto Scarani


Occurence

Kashmir, Burma, Sri Lanka, Madagascar, Australia, China, Montana USA, Thailand

Enhancements

Common enhancements to sapphire varieties:

  • Fracture filling - oil, wax or plastic (with dye or without)
  • Lead glass filling - removes crack increases weight
  • Diffusion treated - heating causing layer on cut stones - enhance color or produce asterism
  • Heat treatment - improves or even changes the color, reduces silk and other impurities
  • Irradiation - change colorless stones to yellow - color unstable
  • Beryllium treatment - Heated with beryllium as a Additive to produce Orange/ yellow / blue colors

A short Film on the Sapphire Mining Techniques in Bang Kacha

Bang Kacha, in Thailand, produces predominately green and golden-orange colored sapphires.
Small quantities of blue sapphires as well as some star stones are found here. <videoflash>TfJ-uvr_jLU</videoflash>

A short Film on Sapphire Mining in Ilikaka, Madagascar

<videoflash>fVHxLVpXNLQ</videoflash>

A short Film on Sapphire Processing in Sri lanka ( ceylon )

This film Shows a trip to the mines of rathnapura, Pale sapphires of blue and yellow are sorted and heat treated at 1000 C for a few hours to produce White Sapphires. The heat dissolves all silk and Makes the stone more whiter and brighter to use as a natural substitute for diamonds.

<videoflash>p_8yOByK348</videoflash>

Sources

  • A students' guide to spectroscopy (2003) - Colin H. Winter
  • Ruby & Sapphire (1997) - Richard W. Hughes ISBN 0964509768

External links