Difference between revisions of "Bixbite"

From The Gemology Project
Jump to: navigation, search
m
Line 9: Line 9:
 
Bixbite is rarely free from inclusions (most are heavily included) and stones above 3ct. are scarse.
 
Bixbite is rarely free from inclusions (most are heavily included) and stones above 3ct. are scarse.
  
Red (Bixbite) and pink (Morganite) Beryls are manufactured using the hydrothermal process by Biron International in Australia. The coloring agent in these synthetics is Titanium opposed to Manganese in their natural counterparts.
+
Red (Bixbite) and pink (Morganite) Beryls are manufactured using the hydrothermal process by Biron International in Australia, by ANICS in Japan and by Novosibirisk in Russia. The coloring agent in these synthetics is Titanium and/or Cobalt opposed to larger quantities of Manganese in their natural counterparts.<br />
 +
The pleochroism in these synthetics is usually medium to strong where in would be weak in natural Red Beryl. The distinguishing factor for the hydrothermal synthetic Red Beryls is inhomogeneous growth patterns seen under magnification.

Revision as of 07:36, 27 October 2006

Bixbite
Chemical composition Be3Al2(SiO3)6 Beryllium aluminum silicate
Crystal system Hexagonal
Habit Prismatic
Cleavage Basal, poor
Fracture Conchoidal to uneven
Hardness 7.5 - 8
Optic nature Uniaxial -
Refractive index 1.561 - 1.577
Birefringence 0.004 - 0.009
Dispersion Low, 0.014
Specific gravity 2.63 - 2.72
Lustre Vitreous
Pleochroism Weak

Bixbite (or "Red Beryl") is the allochromatic orange-red to purplish-red variety of Beryl which owes its color due to Manganese (Mn) impurities.
Physical and optical properties may be slightly higher than usual Beryl properties.

Bixbite was named after Maynard Bixby of Utah, USA.
Locations where this rare mineral is found include Utah and New Mexico, USA.

Bixbite is rarely free from inclusions (most are heavily included) and stones above 3ct. are scarse.

Red (Bixbite) and pink (Morganite) Beryls are manufactured using the hydrothermal process by Biron International in Australia, by ANICS in Japan and by Novosibirisk in Russia. The coloring agent in these synthetics is Titanium and/or Cobalt opposed to larger quantities of Manganese in their natural counterparts.
The pleochroism in these synthetics is usually medium to strong where in would be weak in natural Red Beryl. The distinguishing factor for the hydrothermal synthetic Red Beryls is inhomogeneous growth patterns seen under magnification.